KL6M. PLUS Miner's Cap Lamp Miner's Lamp Miner's Safety Lamp
1. Application and characteristic
KL6M.PLUS is special illuminating lamp for workers carrying individually under mine.
This series is our new self-designed generation product. It adopts Li-ion battery, osram-LED double light sources, with smart size and light weight, free aintenance battery, and long life LED.
2.Working conditions:Temperature: -8-40ºC
3. Explosion-proof type: Exs I
4.Technical Parameter
Features |
KL6M.PLUS Specifications |
Rated capability |
6.6Ah(li-ion battery) |
Rated voltage |
3.7V |
Continuous discharging time |
>18h |
Main light LED Working voltage |
3.2V |
Main light LED Working current |
0.55A |
Main light Power |
5W |
Main light Luminous flux |
>260Lm |
lamp lighting degree (distance 1 meter) |
>24000Lux (at the starting time)
>16000Lux (after 13hours working time) |
Main light Usage life hour |
>100000h |
Accessory light Usage life hour |
100000h |
Short circuit protect time |
<15ms |
Usage duration of battery (recharges) |
1000 recharges (in reasonable working condition) |
Charging time |
≤12hours |
Weight |
<490g |
Charing voltage and current |
DC:4.2V 1000mA |
5.Structure
- 1. This series lamp is portable, the lamp head and battery part are connected by cable's upper cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
- 2. A osram- LED main light source is installed in, KL6M.PLUS, several LED auxiliary light sources. main source and auxiliary sources illuminate alternatively.
- 3. This battery case is designed with closed wear-ring, convenient for carrying.
- 4. This lamp head is designed with charging device, matching with charging set, convenient and reliable for charging.
- 5.PTC self-protection is set between battery group, and reusable short circuit protective device is set on cable's battery end. Thus, this is very safe and reliable.
6.Usage and maintenance
- 1 The battery is charged with more than 1/4 power when shipped out of factory, turn on the switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
- 2 Charge with matched charging set or unit charger.
- 3. Please turn off lamp when charging.
- 4. If any damage happened in using, give it to check department after leaving mine well, and maintain by professional person with special tool, don't open lamp yourself, especially under mine.
- 5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life of service would be reduced.
- 6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty, and restart the lamp, it will work normally.
- 7. If the lamp was not used usually, please charge per three months in storage period.
- 8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to affect normal warning.
7.Charging :
- 1.Charger input: AC100-240V,50-60Hz ,0.4A .
- 2.Charger output : DC :4.2V@1000mA
- 3.Connect to power supply, plug lamp head into charging socket, clockwise turn 180 degree to make charging points contact well, watch whether the indicator is normal. It will take 10-12hours to be charged fully.