Kl2.5lm (A) Miner′s Lamp Miner′s Cap Lamp Miner′s Safety Lamp

• Type: Mining lamp
• IP Rating: IP65
• Light Source: LED
• Material: PC
• Battery: Li-ion Battery
• Transport Package: Carton Box
• Model NO.: KL2.5LM(A)
• Specification: 2.5Ah rated capacity
• Trademark: CNC
• Origin: China
• Production Capacity: 1000pieces/Week

Product Description

KL2.5LM(A)Miner's Lamp Miner's Cap Lamp Miner's Safety Lamp

1. Application and characteristic
KL2.5LM(A) is special illuminating lamp for workers carrying individually under mine.
This series is our new self-designed generation product. It adopts Li-ion battery, LED
double light sources, with smart size and light weight, free maintenance battery, and long life
LED.
2.Working conditions
Temperature: 0-40ºC
3. Specs and signification
     K   L  2.5  L   M  ( )
                              Design serial No.
                              Free of maintenance
                              LED light source
                              Rated capacity (Ah)
                              Li-ion battery
                              Mining safety lamp
 
4. Standard
GB 7597-2003 General Requirement for Miner's Lamp Safety
MT 242-2004 KL Series Miner's Lamp
Q/JY 069-2006 KL Series Miner's Lamp
5. Explosion-proof type: Exs I
Structure
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, KL2.5LM(A) , several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. This lamp head is designed with charging device, matching with charging set, convenient
and reliable for charging.
5. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter

No.	Rated capacity (Ah)	Rated voltage (V)	Lighting time	LED main light source parameter				Life of service	Valid storage period	Weight (g)
				Voltage (V)	Current (A)	Luminance(lx)
						Lighting start	Lighting 13h
1	2.5	3.6	≥14	3.6	0.18	4000	3900	500	half a year	445

Usage and maintenance
1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take 10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.