| Customization: | Available |
|---|---|
| Application: | Three Phase Transducer, Single-phase Transducer |
| Main Circuit Type: | Voltage |
|
Still deciding? Get samples of US$ 85/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Item Description | |
| Braking Function |
Braking by power consumption |
Outer connected to braking resistance, maxi braking torque 100% |
| Brake by direct current | When starting or stopping, it is optional respectively, action frequency: 0-20Hz, action voltage level: 0-20%, action time 0-30s, continuously adjustable. |
|
| Other Function | Jumping frequency, poin t function, counter, rotation speed track, restart after instan-staneous power off, upper and lower frequency limit, acceleration and slow-down modes adjustable, cymometer and voltmeter output, multi-step/ program running, two lines / three lines control, double polar control, selection of multifunctional input terminal, auto reset after fault, 485 serial communication. |
|
| Protection Function | Input protection against phase failure, over-current protection, overloading protection, under-voltage protection, overheating protection, output short circuit protection and etc. |
|
| LED Display | It can display inverter real-time working status, monitoring parameters, function data, fault codes and etc. |
|
| Optional Accessories | Braking parts, remote and operation panel and connection wire, communication panel | |
| Ambient Conditions |
Working site | Indoor, without direct sunshine, no dust, corrosive gas, flammable and explosive gas, oil fog, steam, water drop, salty |
| Altitude | Altitude less than 1000m | |
| Ambient temperature | -10-+45ºC(The only machine:-10~+50ºC) | |
| Humidity | 20~90%RH,Without water condensation | |
| Vibration | <0.5G | |
| Storage temperature | -20~+60ºC | |
| Protection grade | IP20 | |
| Structure | Cooling mode | Fan cooling |
| Mounting mode | Wall hung type, standing type. | |
| Item | Item Description | |
| Input | Rated voltage, frequency | Single phase 220V, three phase 200V, three phase 380V, three phase 480V;50/60Hz |
| Permissible working voltage | Effective value of voltage: 220V clas s 180~230V, 380V class 320~460V Voltage unbalanced rate:<3%; Frequency error:≤+5% |
|
| Output | Rated voltage | Three phases 0~input voltage |
| Frequency | 0~400Hz | |
| Overloading capacity | G type: 110% long term, 150% 1min, 180% 1s, 200% in stantaneous trir P type: 120% 1min, 150% 1s, 180% instantaneous trip |
|
| Control Function |
Working mode | Electromagnetic vector PWM modulation |
| Adjustment range | 1:100 | |
| Starting torque | 100% rated torque at 3Hz | |
| Frequency accuracy | Digital setting: highest frequencyx±0.01% Analog setting: highest frequencyx±0.2% |
|
| Frequency resolution | Digital setting: 0.01Hz; Analog setting: highest frequency×0.1% | |
| Torque | Automatically rise torque up, according to output current it auto rise the torque up. Manually rise torque up, scope:1~30% |
|
| V/F curve | 1. Linear curve 2.Square curve |
|
| Acceleration, slow-down time | 0.1~6000s/min continuous adjustment. | |
| Compensation for rotation error |
Setting scope: 0~20%, it can auto adjust the output frequency of inverter according to the motor loading, to reduce the speed change due the motor load fluctuates. |
|
| Built-in PID | Easily form the loop control system, that it is suitable for pressure control, flux control and etc. |
|
| Auto voltage regulation | When network voltage change, it can auto adjust the output of PWM and keep output voltage constant |
|
| Auto energy-saving run | As load change, it auto optimize the V/F curve, to realize the energy-saved running. | |
| Running Function |
Frequency setting | The setting of Potentiometer in the panel: operation panel / key setting, terminal of outer control Rise / Drop setting, ananlog voltage signal or outer potentiometer setting, analog current signal setting, ananlog combination setting, setting of 485 serial communication. |
| Running command | Control of operation panel, control of outer terminals, control of serial communication | |
| Analog output terminal | 0~10V DC voltage signal output,can realize the output of frequency, current and etc, physical parameters |
|
| Input signal | Positive/megative rotation signal, multi-step signal, fault signal, resetting signal | |
| Output signal | Programmable in tegrated circuit opening output, fault signal output | |
| YCB1000/380V three phase | Appearance Size(mm) LxWxD |
Aperture Size of Panel (mm) L×H |
|||
| No. | Model | Power | Voltage | ||
| 1 | YCB1000 | 0.75kW | 380V | 169×125×170 | Panel:75×55 Panel Cover:95×61 |
| 2 | 1.5kW | ||||
| 3 | 2.2kW | ||||
| 4 | 4kW | ||||
| 5 | 5.5kW | 245×150×188 | Panel:93×70 Panel Cover:131×91 |
||
| 6 | 7.5kW | ||||
| 7 | 11kW | 320×220×210 | Panel:131×70 Panel Cover:156×80 |
||
| 8 | 15kW | ||||
| 9 | 18.5kW | 395×260×215 | |||
| 10 | 22kW | ||||
| 11 | 30kW | ||||
| 12 | 37kW | 520×290×290 | |||
| 13 | 45kW | 570×290×280 | |||
| 14 | 55kW | ||||
| 15 | 75kW | 600×325×310 | |||
| 16 | 93kW | ||||
| 17 | 110kW | 630×380×380 | |||
| 18 | 132kW | ||||
| 19 | 160kW | 880×510×400 | |||
| 20 | 185kW | 980×510×400 | |||
| 21 | 200kW | ||||
| 22 | 220kW | ||||
| 23 | 260kW | 1050×710×420 | |||
| 24 | 280kW | ||||
| 25 | 315kW | ||||
| 26 | 350kW | ||||
| 27 | 400kW | 1200×860×400 | |||
| 28 | 500kW | ||||
| YCB1000/220V s ing le phase | Appearance Size(mm) L×W xD |
Aperture Size o f Panel (mm) L×H |
|||
| No. | Model | Power | Vol tage | ||
| 1 | YCB1000 | 0.75kW | 220V | 142×85×122 | Panel:140×73 Panel Cover:175×87 |
| 2 | 1.5kW | ||||
| 3 | 2.2kW | 185×96×150 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
){kind=link}