|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Electricity Type: | AC |
| Number of Pole: | 3 |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
| Type | Operating and Installation Conditions | |||
| Installation category | III | |||
| Pollution level | 3 | |||
| Certification | CE, CB, CCC, TUV | |||
| Protection degree | Ip20 | |||
| Ambient temperature | limit of temperature: -35ºC~+70ºC, normal temperature: -5ºC~+40ºC, The average no more than +35ºC within 24 hours. If not in normal operating temperature range, please refer to "Instructions for abnormal environment" |
|||
| Altitude | ≤2000m | |||
| Ambient temperature | The maximum temperature of 70 degrees, the air relative humidity not exceed 50%, under lower temperature can allow for higher relative humidity. If the temperature is 20ºC, the air relative humidity could up to 90%, Special measures should betaken for occasional condensation due to humidity changes. |
|||
| Installation position | Inclination between installation surface and vertical surface should not exceed ±5° |
|||
| Shock vibration | Products should be installed and used without significant shake, shock and vibration place. |
|||
| Type | CJX2s-M06 | CJX2s-M09 | CJX2s-M12 | CJX2s-M16 | |||
| Main circuit characteristic | |||||||
| Poles | 3P/4P | ||||||
| Rated insulation voltage(Ui) | V | 690 | |||||
| Rated operating voltage(Ue) | V | 380/400, 660/690 | |||||
| Rated thermal current(Ith) ,AC-1 | 20 | ||||||
| Rated operation current(Ie) |
AC-3,380/400V | A | 6 | 9 | 12 | 16 | |
| AC-3,660/690V | A | 3.8 | 4.9 | 4.9 | 4.9 | ||
| AC-4,380/400V | A | 6 | 9 | 9 | 12 | ||
| AC-4,660/690V | A | 3.8 | 4.9 | 4.9 | 4.9 | ||
| Rated operational power(Pe) |
AC-3,380/400V | kW | 2.2 | 4 | 5.5 | 7.5 | |
| AC-3,660/690V | kW | 3 | 4 | 4 | 4 | ||
| Mechanical life | 10000 times |
1200 | |||||
| Electrical life | AC-3 | 120 | |||||
| AC-4 | See electrical life curve | ||||||
| Frequency of operation |
AC-3 | times/ hour |
1200 | ||||
| AC-4 | 300 | ||||||
| Connecting capability of main circuit terminal | ||||||||||
| Flexible wire | 1 wire mm² | 1…4 | ||||||||
| No terminal | 2 wire | mm² | 1…4 | |||||||
| Flexible wire | 1 wire | mm² | 1…4 | |||||||
| With terminals | 2 wire | mm² | 1…2.5 | |||||||
| Hard wire | 1 wire | mm² | 1…4 | |||||||
| No terminal | 2 wire | mm² | 1…4 | |||||||
| Fastening torque | N·m | 1.2 | ||||||||
| Coil | ||||||||||
| Rated control voltage(Us) |
50Hz | V | 24,36,48,110,127,220,380,415 | |||||||
| 50/60Hz | V | 24,36,48,110,127,220,380,415 | ||||||||
| DC | V | 12,24,36,48,110,127,220 | ||||||||
| Allowed control circuit voltage(Us) |
Operation | V | Installation inclination angle ±22.5°: 85%~110%Us; Installation inclination angle±5°: 70%~120% | |||||||
| Release(AC) | V | Installation inclination angle ±22.5°: 20%~75%Us;Installation inclination angle±5°: 20%~60% | ||||||||
| Release(DC) | V | Installation inclination angle ±22.5°: 10%~75%Us;Installation inclination angle±5°: 10%~60% | ||||||||
| Power consumption of coil |
Actuation | VA | 20-40 | |||||||
| Keep | VA | 9.5 | ||||||||
| Consumption | W | 1-3 | ||||||||
| Auxiliary contacts | ||||||||||
| Auxiliary contacts specification | A | 1NO/1NC | ||||||||
| Rated thermal current (Ith) | A | 10 | ||||||||
| Rated operating voltage (Ue) |
AC | V | 380/400 | |||||||
| DC | V | 220 | ||||||||
| Rated control capacit |
AC-15 | VA | Ue/Ie: AC380V/400V/ 1. 5A It h: 10A | |||||||
| DC-13 | W | Ue/Ie: DC220V/0. 3A | ||||||||
| Certification CCC, CE, TUV, CB | ||||||||||