CNC High Quality Isolating Switch Ych6z-125
YCH6Z-125 series isolating switch is suitable in the resistive circuit of AC 50/60HZ, rated voltage 230/400V, rated current up to 125A.
It's used primarily for circuit's turning on or off in non-load ed situation. And it functions on connection and isolation between lines
and power, especially suitable to isolate power effectively and prevent circuit breaker from closing accidentally when maintain the
circuit in order to ensure the safe operation of maintainer.
Product standard: IEC600947-3
Normal Operating Conditions:
1. Ambient Temperature: -25ºC~+60ºC
2. Altitude: Not higher than 2000m
3. Use Category: AC-22A
4. Installation Method: Embedded vertical standard rail mounting
5. Wiring Method: Clamp connection wire with screw, tightening torque 2.5N.m
Type |
Standard |
|
IEC/EN 60947-3 |
Electrical features |
Poles |
P |
1, 2, 3, 4 |
Rated voltage Ue |
V |
230/400 |
Rated current le |
A |
20,32,40,63, 80,100,125 |
Rated frequency |
Hz |
50/60 |
Rated impulse withstand voltage(1.2/50)Uimp |
V |
4000 |
Rated short-time withstand current lcw |
|
12Ie, 1s |
Rated making and breaking capacity |
|
3Ie, 1.05Ue, cosΦ=0.65 |
Rated short circuit making capacity |
|
20Ie, t=0.1s |
Dielectric test voltage at ind.Freq.for 1min |
kV |
2.5 |
Insulation voltage Ui |
V |
500 |
Pollution degree |
|
2 |
Mechanical features |
Electrical life |
t |
1500 |
Mechanical life |
t |
8500 |
Protection degree |
|
IP20 |
Ambient temperature(with daily average≤35ºC) |
ºC |
-5~+40 |
Installation |
Terminal size top/bottom for cable and pin-type busbar |
mm² |
50 |
AWG |
18-1/0 |