| Customization: | Available |
|---|---|
| Electricity Type: | AC |
| Number of Pole: | 3 |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
product overview
Ycc6 series Ac contact or with novel appearance and compact structure is suitable for using starting & controlling the Ac motorfrequently, switching on and off the circuit at a long distance.
It is used in combination with thermal relay to compose a magnetic motor starter. standard: IEC 60947-1, IEC60947-4-1.
specifications
Rated operation current(le):9-95A
Poles:3p
o Installation: Din rail and screw installation
operating and Installation conditions
| Type | operating and Installation conditions |
| Installation category | |
| pollution level | 3 |
| certification | CE, CB, CCC, TUV |
| protection degree | |
Ambient temperature |
limit of temperature: -35ºC+70ºC; normal temperature: -5ºC~+40ºC; The average no more than+35 within24 hours If not in normal operating temperature range, please refer to "Instructions for abnormal environment" |
| Altitude | ≤2000m |
Ambient temperature |
The maximum temperature of70 degrees, the air relative humidity not exceed 50%, under lower temperature can allow for higher relative humidity. to90%, special measures should be taken for occasional condensation due to humidity changes. |
| Installation position | Inclination between installation surface and vertical surface |
| shock vibration | products should be installed and used without significant shake, shock and vibration place. |
Specifications
Appearance |
|||||||||||
| Type | YCC6-09 | YCC6-12 | YCC6-18 | YCC6-25 | YCC6-32 | YCC6-38 | YCC6-40 | YCC6-50 | YCC6-65 | YCC6-80 | YCC6-95 |
| Poles | 3P | ||||||||||||
| Rated insulation voltage(Ui) | V | 690 | |||||||||||
| Rated operating voltage(Ue) | V | 220/230,380/400,660/690 | |||||||||||
| Rated thermal current(Ith),AC-1 | 20 | 20 | 32 | 40 | 50 | 50 | 60 | 80 | 80 | 125 | 125 | ||
| Rated operation current(Ie) |
AC-3,380/400V | A | 9 | 12 | 18 | 25 | 32 | 38 | 40 | 50 | 65 | 80 | 95 |
| AC-3,660/690V | A | 6.6 | 8.9 | 12 | 18 | 22 | 22 | 34 | 39 | 42 | 49 | 49 | |
| AC-4,380/400V | A | 3.5 | 5 | 7.7 | 8.5 | 12 | 14 | 18.5 | 24 | 28 | 37 | 44 | |
| AC-4,660/690V | A | 1.5 | 2 | 3.8 | 4.4 | 7.5 | 8.9 | 9 | 12 | 14 | 17.3 | 21.3 | |
| Rated operational power(Pe) |
AC-3,380/400V | kW | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 37 | 45 |
| AC-3,660/690V | kW | 5.5 | 7.5 | 10 | 15 | 18.5 | 18.5 | 30 | 33 | 37 | 45 | 45 | |
| AC-4,380/400V | kW | 1.5 | 2.2 | 3.3 | 4 | 5.4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | |
| AC-4,660/690V | kW | 1.1 | 1.5 | 3 | 3.7 | 5.5 | 6 | 7.5 | 10 | 11 | 15 | 18.5 | |
| Mechanical life | 10000 times | 1200 | 1000 | 900 | 650 | ||||||||
| Electrical life | AC-3 | 110 | 90 | 65 | |||||||||
| AC-4 | 22 | 22 | 17 | 11 | |||||||||
| Frequency of operation | AC-3 | times/ hour | 1200 | 600 | |||||||||
| AC-4 | 300 | 300 | |||||||||||
| Flexible wire | 1 wire | mm² | 1 …4 | 1.5 …6 | 2.5…25 | 4…50 | |
| No terminal | 2 wire | mm² | 1…4 | 1.5…6 | 2.5…16 | 4…25 | |
| Flexible wire | 1 wire | mm² | 1…4 | 1…6 | 2.5…25 | 4…50 | |
| With terminals | 2 wire | mm² | 1…2.5 | 1…4 | 2.5…10 | 4…16 | |
| Hard wire | 1 wire | mm² | 1…4 | 1.5 …6 | 1.5 …10 | 2.5…25 | 4…50 |
| No terminal | 2 wire | mm² | 1…4 | 1.5… | 2.5…10 | 4…25 | |
| Fastening torque | N·m | 1.2 | 1.8 | 5 | 9 | ||
| Rated control voltage(Us) | 50Hz | V | 24,36,48,110,127,220/230,240,380/400,415,440 | |||
| 50/60Hz | V | 24,36,48,110,127,220/230,240,380/400,415,440 | ||||
| Allowed control circuit voltage(Us) | Operation | V | Installation inclination angle ±22.5°: 85%~110%Us; Installation inclination angle±5°: 70%~120% | |||
| Release | V | Installation inclination angle ±22.5°: 20%~75%Us;Installation inclination angle±5°: 20%~65% | ||||
| Power consumption of coil |
Actuation | VA | 60 | 70 | 200 | 200 |
| Keep | VA | 6-9.5 | 6-9.5 | 15-20 | 15-20 | |
| Consumption | W | 1-3 | 1-3 | 6-10 | 6-10 | |
| Auxiliary contacts specification | A | 1NO+1NC | |
| Rated thermal current (Ith) | A | 10 | |
| Rated operating voltage (Ue) | AC | V | 380 |
| DC | V | 220 | |
| Rated control capacit | AC-15 | VA | 360 |
| DC-13 | W | 33 | |
| Type | Amax | Bmax | Cmax | a | b | c | d | e | f |
| YCC6-09, 12, 18 | 74.5 | 45.5 | 85.5 | 35 | 50/60 | - | - | - | - |
| YCC6-25, 32, 38 | 83 | 56.5 | 97 | 40 | 50/70 | - | - | - | - |
| YCC6-40, 50, 65 | 127.5 | 74.5 | 117 | - | - | 105 | 40 | 100/110 | 59 |
| YCC6-80, 95 | 127.5 | 85.5 | 125.5 | - | - | 105 | 40 | 100/110 | 67 |
Type |
Rated operation current(Ie)(A) |
Rated thermal current (Ith)(A) |
Rated operational power in category AC-3 (kW) | |
| 380V | 660V | |||
| YCC6-09N | 9 | 20 | 4 | 5.5 |
| YCC6-12N | 12 | 20 | 5.5 | 7.5 |
| YCC6-18N | 18 | 32 | 7.5 | 10 |
| YCC6-25N | 25 | 40 | 11 | 15 |
| YCC6-32N | 32 | 50 | 15 | 18.5 |
| YCC6-38N | 38 | 50 | 15 | 18.5 |
| YCC6-40N | 40 | 50 | 18.5 | 30 |
| YCC6-50N | 50 | 60 | 22 | 33 |
| YCC6-65N | 65 | 80 | 30 | 37 |
| YCC6-80N | 80 | 95 | 37 | 45 |
| YCC6-95N | 95 | 95 | 45 | 55 |
|
|
|
|
|
|
|
|
|
|
|
|
|
){kind=link}