Good Service 18.5kw 38A Ycqj7 Controller Factory Switch Driver Motor Magnetic Starter

• Task: Adjust
• Structure: Open-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control
• Certification: RoHS, CCC, ISO: 9001, CE
• Model NO.: YCQJ7
• Condition: New
• Customized: Non-Customized
• Material: Stainless Steel
• Conventional Heating Current (a): 2.4-38 a
• Frequency: 50/60Hz
• Pollution Degree: 3
• Rated Control Power: 18.5kw
• Model of AC Contactor: Cjx2s-9 12 18 25 38
• Transport Package: 12PCS/CTN
• Specification: YCQJ7 Motor Controller
• Trademark: CNC
• Origin: Zhejiang, China
• HS Code: 8511409900
• Production Capacity: 80000 Unit/Week

Product Description

 

Our Services

 

Product Description

General

 

YCQJ7 series motor controller (hereinafter referred to ascontroller) is mainly used in circuits with a frequency of AC 50Hz (or 60Hz), a rated operational voltage of up to 380V and a rated control power of up to 18.5kW (current up to 38A) to control the direct start and stop of water pumps ormotors, provide motors with overload and phase failure  protection,  and  realize  automatic  liquid  level  control  for  civil  water towers and reservoirs.This product is not applicable to the liquid level control of low- conductivity liquids, such as oil, purified water,inflammable and explosive chemical liquids and high-density sewage.

Operating conditions
3.1 Altitude: the altitude of the mounting location should not exceed 2000m;
3.2 Ambient temperature: -5ºC~+40ºC, and the average temperature in 24h should not exceed +35ºC;
3.3  Atmospheric  conditions:  The  relative  air  humidity  at  the  mounting  location should not exceed 50% at the maximum
temperature   of   +40ºC .   The   relative   humidity   may   be   higher   at   lower temperatures.Special measures should be
taken  if  condensation  occurs  on  the   product  occasionally  due  to  temperature variation;
3.4 Pollution degree: 3;
3.5 Mounting category: ;
3.6 In places where there is no significant vibration or impact;
3.7 In non-explosive media that do not contain a sufficient amount of gas or dust to cause metal corrosion or insulation failure;
3.8 In places where rain and snow protection is provided;
3.9 The inclination from the vertical plane should not exceed 5° .

Type	Conventional heating current (A)	Max. rated power (kW)		Model of matching    AC contactor	Model of matching motor protector	Setting current range (A)	Number of turns of protector (turn)
		AC-3
		380V	220V
YCQJ7 0.72A~2.4A	2.4	1.1	0.55	CJX2s-09	JD-8/0.5A~5A	0.72~2.4	5
YCQJ7-W 0.72A~2.4A
YCQJ7 3.5A~11A	12	5.5	3	CJX2s-12	JD-8/0.5A~5A	3.5~11	1
YCQJ7-W 3.5A~11A
YCQJ7 10A~16A	16	7.5	4	CJX2s-18	JD-8/0.5A~5A	10~16	1
YCQJ7-W 10A~16A
YCQJ7 20A~25A	25	11	5.5	CJX2s-25	JD-8/0.5A~5A	20~25	1
YCQJ7-W 20A~25A
YCQJ7 30A~38A	38	18.5	9	CJX2s-38	JD-8/0.5A~5A	30~38	1
YCQJ7-W 30A~38A

 

 

4.2 Rated control supply voltage Us: AC220V, AC380V.
4.3 Degree of protection of enclosure: Ip55.
4.4 Protection characteristics of the controller.
4.4.1 Phase failure protection characteristics of the controller: In case of failure of any phase of the three-phase main circuit passing  through the center  hole of the motor comprehensive protector in the controller, the motor comprehensive protector operates for a period of ≤5s.
4.4.2 Overload protection characteristics of the controller under balanced three-phase load.
4.5 Down-lead distance of liquid level control electrode: 200m max.
 

No.	Setting Current multiple	Operation time			Starting conditions
1	1.05	No operation within 2h			Cold state start
2	1.2	Operation within 2h			Start after No.1
3	1.5	Tripping class	30	≤12min	Start after applying a 1.0 times setting current for 2h
4	7.2	Tripping class	30	9s<Tp≤30s                            Cold state start

 

 

Features
The controller consists of a CJX2s series Ac contactor, a JD-8 series motor comprehensive protector and an YCL8 liquid levelrelay in a protective enclosure and is divided into two types, with liquid level relay and without iquid level relay. Products with iquid levelrelay are used to control the start and stop and automatic pumping and drainage of water pumps and provide and stop and automatic pumping and drainage of water pumps and provide overload and phase failureprotection. Products without liquid level relay are used to control the start and stop of motors and provide overload and phase failureprotection.
Setting of the motor comprehensive protector in the controller is required before it is connected and put into use.
 

Company Profile

 

 

Our Advantages

 

 

Our Clients/Partners

 

 

Packaging & Shipping