CNC High Quality Three Phase 9A-95A Push Button Type Magnetic Starter

• Customization: Available
• Electricity Type: AC
• Number of Pole: 3
• Model NO.: YCQ7
• Main Circuit Rating Voltage: 220V/ 380V/ 660V
• Main Circuit Rating Current: 9A~95A
• Type: Ac Contactors
• Frequency: 50Hz/60Hz
• Matched Thermal Relay: Jr28/Jr28s
• Matched AC Contactor Type: Cjx2/Cjx2s
• Standard: IEC/En 60947-4-1
• Rated Current Ie a: 9A-95A
• Rated Control Power: 45W
• Power Supply Voltage: 36V,110V,220V,380V
• Transport Package: 12PCS/CTN
• Specification: YCQ7 220V 50/60Hz
• Trademark: CNC
• Origin: Zhejiang, China
• Production Capacity: 80000 Unit/Units Per Week
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 15.000kg

Product Description

 

Our Services

 

Product Description

General
YCQ7 series magnetic starter is suitable for those circuits whose rated voltage is up to 660V, AC 50Hz or 60Hz, rated control power to 45kW and current to 95A. It is used to control the direct start and stop of the motor, and the starter with thermal overload relay protects the motor from overload and phase failure.
Standard: IEC/EN 60947-4-1.



Operating conditions
  Altitude:≤2000m.
  Ambient  air  temperature:-5ºC~+40ºC,  average  temperature  of  24  hours  must below+35ºC .
  Relative  humidity:  The  maximum  temperature  is  40  degrees,  and  the  relative humidity  of  the  air  should  not  exceed  50%.  Higher  relative  humidity  can  be allowed at lower temperatures. The average minimum temperature in the wettest month must be below 25°C and the maximum relative humidity of the month should  not  exceed  90%.If  the   humidity  changes  because  of  occasional  gel generation, it should be eliminated.
  Installation position: The installation degree of the tilt and vertical plane should not exceed 5° .
  In  a   non-explosive  hazardous  medium  and  without  enough   position   in  the medium to corrode metals, destroy insulating gases and conductor dust.
  Where there is rain and snow protection and no steam.
  Shock vibration:  Products  should  be  installed  and  used  without  severe  shake, shock and vibration of the place.


Technical data
  Coil rated control power supply voltage Us can be divided into AC 50Hz or 60Hz: 36V, 110V, 220V, 380V.
  Operating condition: Coil  pull-in voltage  is  (85%~110%)  Us;  Release voltage  is (20%~75%) Us.

Type	Rated current Ie A	Maximum power duty (kW)			Matched AC   contactor type	Matched thermal relay	Setting current range (A)
		AC-3
		660V	380V	220V
YCQ7-09	9	5.5	4	2.2	CJX2-D09/CJX2s(CJX2i)-09	JR28-25  JR28s-25	2.5~4, 4~6, 5.5~8
YCQ7-12	12	7.5	5.5	3	CJX2-D12/CJX2s(CJX2i)-12	JR28-25  JR28s-25	7~10, 9~13
YCQ7-18	18	10	7.5	4	CJX2-D18/CJX2s(CJX2i)-18		12~18
YCQ7-25	25	15	11	5.5	CJX2-D25/CJX2s(CJX2i)-25		17~25
YCQ7-32	32	18.5	15	7.5	CJX2-D32/CJX2s(CJX2i)-32		23~32
YCQ7-40	40	18.5	18.5	11	CJX2-D40/CJX2s(CJX2i)-40	JR28-93  JR28s-93	23~32, 30~40 37~50, 48~65 55~70, 63~80 80~93
YCQ7-50	50	22	22	15	CJX2-D50/CJX2s(CJX2i)-50
YCQ7-65	65	30	30	18.5	CJX2-D65/CJX2s(CJX2i)-65
YCQ7-80	80	37	37	22	CJX2-D80/CJX2s(CJX2i)-80
YCQ7-95	95	45	45	25	CJX2-D95/CJX2s(CJX2i)-90

Product features
The starter adopts a protective structure with a protective cover of IP55 and is internally composed of a CJX2 AC contactor and a JR28 thermal overload  relay.  The entry and exit wiring of the  starter adopts the  knockout  type wiring  hole,  and the  user  can selectively knock and connect the four knockout holes according to the wiring requirements. The cover and the base of the starter can be completely separated, and it is very convenient for users to install and maintain; the button adopts the XB2 series push button switch assembly to realize the start and stop of the starter, and it will be safe and reliable.
In order to improve the protective performance of the starter, the starter must be installed vertically. The mounting screws should be selected according to the size of the mounting hole. The screws should not be less than M5, and spring washers, flat washers and sealing rubber rings should be added to ensure the fastening of the starter. In addition, the knockout terminal holes should be equipped with corresponding waterproof terminals.


Overall and mounting dimensions(mm)

 

Company Profile

Our Advantages

Our Clients/Partners

Packaging & Shipping