| Customization: | Available |
|---|---|
| Electricity Type: | AC |
| Number of Pole: | 3 |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
General
YCX2s series AC Contactor with novel appearance and compact structure is suitable for
using starting & controlling the AC motor frequently, switching on and off the circuit at a long distance. It is used in combination with thermal relay to compose a magnetic motor starter.
Standard: lEC 60947-1, IEC 60947-4-1.
• Rated operation current(le): 9-32A
• Rated operation voltage(Ue):220V~690V
• Rated insulation voltage: 690V
• Poles: 2P
• Installation: Din rail and screw installation
Operating conditions
| Type Operating | Conditions |
| Installation category | III |
| Pollution degree | 3 |
| Certification | CE, CB, CCC, TUV |
| Protection degree | YCX2s-09~32:IP20(front side) |
Ambient temperature |
Limit of temperature: -35°C~+70°C; Normal temperature: -5°C~+40°C; The average no more than +35°C within 24 hours; If not in normal operating temperature range, please refer to "In- structions for abnormal environment" . |
| Altitud | ≤ 2000m |
Ambient temperature |
The maximum temperature of 70 degrees, the air relativehumid- ity not exceed 50%,under lower temperature can allowfor higher relative humidity.If the temperature is 20°C, the air relative humidity could upto 90%,Special measures should be taken for occasional- condensation due to humidity changes. |
| Installation position | Inclination between installation surface and vertical surfaceshould not exceed +5° |
| Shock vibration | Products should be installed and used without significant- shake,shock and vibration place. |
Specifications
| Type | YCX2s-09 | YCX2s-12 | YCX2s-18 | YCX2s-25 | YCX2s-32 | ||
Main circuit characteristic |
|||||||
| Poles | 2P | ||||||
| Rated insulation voltage(Ui) | V | 690 | |||||
| Rated operating voltage(Ue) | V | 380/400, 660/690 | |||||
| Rated thermal current(Ith),AC-1 | 20 | 20 | 32 | 40 | 50 | ||
Rated operation current(Ie) |
AC-3,380/400V | A | 9 | 12 | 18 | 25 | 32 |
| AC-3,660/690V | A | 6.6 | 8.9 | 12 | 18 | 22 | |
| AC-4,380/400V | A | 3.5 | 5 | 7.7 | 8.5 | 12 | |
| AC-4,660/690V | A | 1.5 | 2 | 3.8 | 4.4 | 7.5 | |
Rated operational power(Pe) |
AC-3,380/400V | kW | 4 | 5.5 | 7.5 | 11 | 15 |
| AC-3,660/690V | kW | 5.5 | 7.5 | 10 | 15 | 18.5 | |
| AC-4,380/400V | kW | 1.5 | 2.2 | 3.3 | 4 | 5.4 | |
| AC-4,660/690V | kW | 1.1 | 1.5 | 3 | 3.7 | 5.5 | |
| Mechanical life | 10000 times | 1200 | 1000 | ||||
| Electrical life | AC-3 | 110 | 90 | ||||
| AC-4 | 22 | 22 | |||||
| Frequency of operation | AC-3 | times/ hour | 1200 | 600 | |||
| AC-4 | 300 | 300 | |||||
| Flexible wire | 1 wire | mm2 | 1…4 | 1.5…6 | |
| No terminal | 2 wire | mm2 | 1…4 | 1.5…6 | |
| Flexible wire | 1 wire | mm2 | 1…4 | 1…6 | |
| With terminals | 2 wire | mm2 | 1…2.5 | 1…4 | |
| Hard wire | 1 wire | mm2 | 1…4 | 1.5…6 | 1.5…10 |
| No terminal | 2 wire | mm2 | 1…4 | 1.5… | |
| Fastening torque | N·m | 1.2 | 1.8 | ||
| Rated control voltage(Us) | 50Hz | V | 220 | |
| 50/60Hz | V | 220 | ||
| Allowed control circuit voltage(Us) |
Operation | V | Installation inclination angle ±22.5°: 85%~110%Us; Installation inclination angle±5°: 70%~120% | |
| Release | V | Installation inclination angle ±22.5°: 20%~75%Us; Installation inclination angle±5°: 20%~65% | ||
| Power consumption of coil |
Actuation | VA | 60 | 70 |
| Keep | VA | 6-9.5 | 6-9.5 | |
| Consumption | W | 1-3 | 1-3 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
){kind=link}